ProNet Safety Services supply and install a wide range of Mobile Anchor systems where there is a requirement to meet certain health and safety standards in order to protect personnel while they are working at a height.
Mobile Anchors are primarily used in situations where there is no edge protection or guardrail and it is not viable to install such systems. They are a cost effective, safe solution that can be applied to a variety of jobs and conditions; they can also be dismantled and transported from location to location and are easily reused.
The 6 Leg Mobile Man Anchor has a total weight of 260kg and is suitable for most applications. It consists of a 6 leg 20kg central anchor point onto which the 20kg steel weights and 20kg rubber weights are added. The steel weights have 5mm rubber protection pads fitted, this prevents any possible damage to susceptible roof surfaces and provides better grip on all surfaces.
The 8 Leg version of the Mobile Man Anchor is only required on steel or PVC membrane roofs. At 340kg it’s extra weight prevents any possible movement of the anchor on the smoother surfaces of these roof surfaces.
The components are exactly the same as our 6 leg product, with the addition of 2 extra steel weights, 2 extra rubber weights and an 8 leg central anchor point. The steel weights have 5mm rubber protection pads fitted, this prevents any possible damage to susceptible roof surfaces and provides better grip on all surfaces.
ProNet can also supply and fit the Kee Anchor® range of products; these are a modular mobile anchor fall prevention system, for use with Personal Protection Equipment (PPE). This range of products includes Weightanka®, Wireanka® and Accessanka®.
A mobile deadweight anchor for use on roofs up to 5 degree pitch, where the installation of collective protection or permanent anchor devices is not viable. Weightanka® utilises a central pedestal which allows the attachment of a safety harness and lanyard and raises the height at which the arrest force is applied.
Conforms to Class E EN 795, BS7883 & ISO 14567, and is approved to meet the PPE Directive.
Designed as an accessory to Weightanka® to provide a portable anchor device for rope access workers, allowing them to work safely.
Conforms to Class B EN 795, BS 7883 & ISO 14567.
A system of deadweight anchor devices designed to support Class `C’ horizontal, flexible safety lines to BS EN 795. It is intended for use on flat roofs, in temporary situations, or where it is preferable the penetration of the roof surface be avoided.
Conforms to Class C EN 795 & ISO 14567.